home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Chip 1998 February
/
CHIP Şubat 1998.iso
/
drivers
/
SESK
/
gaudbli
/
INSTALL.DAT
< prev
next >
Wrap
Text File
|
1995-10-17
|
10KB
|
354 lines
//--------------------------------------------------------------------
//
// INSTALL on-line Help Text File
//
// Help Customization Guidelines:
//
// 0) Comment lines start with leading '//'.
// 1) Help Message Text starts with #MESSAGE statement
// 2) Never change the number after the #MESSAGE statement. That is
// the search Message ID for the INSTALL program.
// 3) LINES statement defines how many (lines) x (characters) allowed.
// Never exceed this limits when you type the text for the message.
// 4) TITLE statement defines the sub-Title of this message.
// (allow to modify for your customization)
// 5) Text area starts and ends with a '$'.
// (allow to modify for your customization)
// 6) the INSTALL program is not going to format your
// text. It just show whatever text you typed here
// line by line. So you have to do the formatting for
// better effect and please use SPACEs but not TABs.
// (you don't need to enter trailing SPACE lines. If there is space
// left at the bottom of a HELP message, white space is the default.)
// 7) Anyway, give a try and see how it goes.
//
// 9) Format Overview (example)
//
// #MESSAGE = 1 // starts Help message 1
// TITLE="Selcet CD-ROM Type" // sub-title of this message
// LINES=9x50 // allowed text area:
// // 9 lines x 50 characters
// $ // starts text area
// TEXT LINEs
// TEXT """" // help text
// " " "
// $ // end of text area
//-----------------------------------------------------------------
//
// INSTALL Help Text: Message by Message
//
#MESSAGE = 1
TITLE="Welcome to the Installer"
LINES=9x42
$
INSTALL is a complete Installation
and Test Program for your Sound Card.
A mouse is recommended. If you do not
have a mouse, use the following keys:
[TAB] to move to option
[ENTER] to execute option
[] to select option
[F3] to exit the installation
[ALT+Key] to activate a button
$
#MESSAGE = 2
TITLE="Installation Options"
LINES=6x52
$
This Installation will do the following:
- Install Drivers and Utilities for DOS
- Configure and Test your Sound Card
- Install and Setup CD-ROM Software Drivers
- Display Information file README.TXT
$
#MESSAGE = 20
TITLE="Test & Configuration Options"
LINES=6x52
$
This Test and Configuration program will:
- Configure and Test your Sound Card
- Change CD-ROM settings and update system files
- Perform 8 bit, 16 bit and FM Music Sound Tests
- Allow you to change volume settings
- Display Information file README.TXT
$
#MESSAGE = 3
TITLE="User Directory Selection"
LINES=4x48
$
Select the drive and enter the directory where
you would like to install your software into.
The required and available disk space for the
complete installation is listed below.
$
#MESSAGE = 4
TITLE="Microsoft Windows Directory Selection"
LINES=5x48
$
INSTALLER needs to know where your Microsoft
Windows directory is. If you do not have
Microsoft Windows installed or you do not want
to install the device drivers and applications
for Microsoft Windows, select [NONE].
$
#MESSAGE = 5
TITLE="CD-ROM Selection"
LINES=4x44
$
MAD16 Pro sound card can be used as a CD-ROM
interface board. Select your CD-ROM drive
type or select [None] if you do not want to
connect a CD-ROM drive to the sound card.
$
#MESSAGE = 6
TITLE="CD-ROM Default Settings"
LINES=4x44
$
Select [OK] if you want to accept the
default settings for your CD-ROM.
Select [CUSTOMIZE] if you want to customize
the I/O address, Interrupt and DMA channel.
$
#MESSAGE = 7
TITLE="CD-ROM Harware Configuration"
LINES=3x48
$
Select [OK] if you want to accept the selected
settings for your CD-ROM. Select [DEFAULTS]
if you want to reset to the default settings.
$
#MESSAGE = 8
TITLE="File Copy Confirmation"
LINES=4x45
$
INSTALLER is going to start copying files to
your hard disk. Select [OK] to continue if
the User Directory are correct. Select
[CHANGE] if you want to make a change.
$
#MESSAGE = 11
TITLE="SOUND TEST"
LINES=3x36
$
Select a Sound Test option below.
Select [DONE] when test is done and
go back to the previous Window.
$
#MESSAGE = 13
TITLE="Select MSCDEX.EXE for CD-ROM"
LINES=7x44
$
The following is MSCDEX(s) on your system. Please
select one compatible with your DOS version.
* For DOS/Windows 3.1, use the one which came
with DOS.
* For Windows 95/DOS, use the one which came
with Windows 95.
$
#MESSAGE = 14
TITLE="No MSCDEX.EXE in your System"
LINES=10x50
$
To use your CD-ROM Drive, you need the program
MSCDEX.EXE from Microsoft. INSTALL has scanned
your hard disk(s) and did not find one. Besides,
your DOS version is very old. We don't have a
MSCDEX version good for you. INSTALL has inserted
a MSCDEX line with leading 'REM' into your
AUTOEXEC.BAT anyway. If you locate a MSCDEX file
later, please copy it into the MAD16 Pro directory
and remove the REMark from the MSCDEX line.
$
#MESSAGE = 15
TITLE="System Files Update"
LINES=6x48
$
INSTALLER is going to update your DOS
system files CONFIG.SYS and AUTOEXEC.BAT.
Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
the backup files CONFIG.MAD and AUTOEXEC.MAD.
$
#MESSAGE = 16
TITLE="Windows System Files Update"
LINES=4x46
$
INSTALLER is going to update your WINDOWS
system files SYSTEM.INI and MIDIMAP.CFG.
Select [OK] if you want INSTALLER to make the
changes NOW or select [BACKUP ONLY] if you
want INSTALLER only to save the changes to
the backup files SYSTEM.MAD and MIDIMAP.MAD.
$
#MESSAGE = 17
TITLE="Windows Sound Application Installation"
LINES=5x46
$
INSTALLER has also installed Windows Sound
Applications into your system. The Sound
Applications Group and its Applet Icons will
show on your screen when you run Windows the
very next time.
$
#MESSAGE = 18
TITLE="Installation Successful"
LINES=10x46
$
Installer has completed successfully. You
must reboot your system in order to run
sound applications. Select [REBOOT] now to
reboot or select [EXIT] to return the system.
If selecting [REBOOT], please first remove
any diskettes from your floppy drives.
Type "SNDINIT" at the DOS prompt to test and
reconfigure your Sound Card settings when
necessary at a later time.
Thank you for using MAD16 Pro sound system.
$
#MESSAGE = 19
TITLE="Not Enough Conventional Memory Detected"
LINES=10x56
$
Your system has LESS THAN 500 KBytes of recommended
conventional memory. To run DOS games, you need at
least the recommended size above. It is also
recommended that this amount of memory be available
in order to successfully run this program. You can
increase your memory either by running a memory maker
program that comes with your operating system; or
remove any memory resident programs that resides in
your system memory. Do you wish to Exit this program
and increase your system memory now?
$
#MESSAGE = 21
TITLE="MAD16 Pro Registration"
LINES=6x46
$
Now is a good time to register your 16-bit
Sound Card and receive the latest services
and support from your manufacturer. You must
register first in order to receive Technical
Support from your manufacturer.
$
#MESSAGE = 22
TITLE="Welcome to the SNDINIT Program"
LINES=9x42
$
SNDINIT is a complete Testing and
Configuration Program for your Sound Card.
A mouse is recommended. If you do not
have a mouse, use the following keys:
[TAB] to move to option
[ENTER] to execute option
[] to select option
[F3] to exit the program
[ALT+Key] to activate a button
$
#MESSAGE = 23
TITLE="CD-ROM driver Installation"
LINES=6x48
$
Installer does not have the CD-ROM driver for
your CD-ROM. Installer will only update the
the CD-ROM settings of the Sound Card in
CONFIG.SYS. Please run the installation program
from your CD-ROM manufacturer to install the
CD-ROM driver and MSCDEX program.
$
#MESSAGE = 24
TITLE="Reboot System"
LINES=5x49
$
Your CONFIG.SYS has been updated according to
the new settings for your CD-ROM. You must REBOOT
your computer in order for the new settings to
take effect. Select [OK] to REBOOT your computer.
Select [EXIT] to return to DOS.
$
#MESSAGE = 25
TITLE="Reboot System"
LINES=4x46
$
Your BLASTER Environment Variable is updated
in your AUTOEXEC.BAT file. Some DOS games may
reference this variable for initialization
purposes. Do you wish to REBOOT your computer?
$
#MESSAGE = 26
TITLE="Error!"
LINES=2x48
$
Hardware Error Detected! Please reconfigure your
Sound Card's I/O Port, IRQ, or DMA settings.
$
#MESSAGE = 27
TITLE="Error!"
LINES=4x45
$
You have selected the same I/O Port setting
between your Audio, CD-ROM, and MPU-401
device. This will cause conflict on your
system. Please reselect a different I/O Port.
$
#MESSAGE = 28
TITLE="Error!"
LINES=4x47
$
You have selected the same IRQ settings between
your Audio, CD-ROM, and MPU-401 device. This
will cause conflict on your system. Please
reselect a different IRQ setting.
$
#MESSAGE = 29
TITLE="Error!"
LINES=4x47
$
You have selected the same DMA settings between
your Audio, and CD-ROM device. This will cause
conflict on your system. Please reselect a
different DMA setting.
$
#MESSAGE = 30
TITLE="Warning!"
LINES=3x48
$
You have selected Windows Sound System using IRQ
5. Some DOS games that support Windows Sound
System may not work with this option.
$